JDS-1立式接觸式干涉儀
本儀器是一種采用量塊或標準零件借以高精度的比較方式的立式精密長度計量?jī)x器。主要用于150mm以下塊規,亦可用作高精密度的長度和外徑的精密測量,是各級計量室的基本長度計量?jī)x器之一。
JDS-1 Interferometer is applicable for measurement of 3-4 grade gauge blocks or precision sizes up to 150 mm by high-precision comparison with a higher grade of gauge block or a standard reference component. It is one of the basic length-metrological instruments.
and cylinders.
JDS-1立式接觸式干涉儀技術參數:
被測件最大長度 Max. measured length |
150 mm | |||||||||||
工作臺行程 Lifting range of worktable |
5 mm | |||||||||||
測桿移動范圍 | 0.5mm | |||||||||||
分劃板刻度范圍 | ±50格 | |||||||||||
直接測量范圍 Measuring range |
5-20μm | |||||||||||
分度值調整范圍 Adjusting range of grad |
0.05-0.2 μm | |||||||||||
推薦使用分度值Recommended grad |
0.1 μm | |||||||||||
測量壓力 Measuring force |
(1.5±0.1) N | |||||||||||
儀器示值穩定性 Indication reliability |
0.02 μm | |||||||||||
儀器誤差 Indication error |
數字顯示 Digital display | |||||||||||
最大測量誤差 Max.measurement error |
| |||||||||||
儀器體積 Dimensions |
280×500×700 mm | |||||||||||
儀器重量 Weight |
40 kg | |||||||||||
標準配件 Standard attachments |
|